Call for Bidding / Medical equipment: Anesthesia Machine, Ceiling lamp, Orthopedic operation table

Anesthesia Machine

• Delivering anesthesia Agents to Patient during Surgery Procedures
• Monitoring system of ECG, EtCO2, Pulse Oximeter and airway pressure, NIBP, and skin Temperature (2 options are needed: build in monitor or separate monitor)
• Anesthesia Gas monitoring system O2, N2O, and Compressed Air
• Scavenger System
• Isoflurane Vaporizer and Sevoflurane Vaporizer
• Provision for delivery of oxygen, nitrous oxide and medical air with pressure gauges
• Audio-visual oxygen Failure Warning System with Nitrous oxide cut off
• Flowmeter Oxygen, Flowmeter Nitrous Oxide, and Flowmeter Compressed Medical Air
• Top Shelf to keep monitors and a Tabletop with Drawers to keep anesthetic drugs, equipment etc.
• Durable , moisture resistant and antistatic Wheels with Brakes
• The Anesthesia machine frame shall be made of rust proof material/Stainless steel or sheet Steel protected with Epoxy-Paint
• Adjustable pressure limiting Valve, breathing circuit pressure measuring  device
• Bag/Ventilator selecting Valve integrated onto the Absorber
• Easily attach oxygen sensor
• CO2 absorbent Chamber Canister (Soda Lime)
• Supplied with adult and pediatric Bellows
• Can operate for Adult and Pediatrics
• Ability to set Tidal Volume, Respiratory rate and I:E ratio Ventilator should have audible alarms for ventilator failure, low oxygen supply Pressure, inadequate volume delivery, disconnection alarm, and power supply failure
• Hose assembly for piped Oxygen supply (2 Sets), Hose assembly for piped Nitrous Oxide supply (2 Sets), and Hose assembly for piped  Air supply (2 Sets)
• Power supply 220 Volt, 50 Hz
• Backup Battery (for about 3 hours)
• CE, FDA approved   

Ceiling Light

• Operating LED Light
• Ceiling Mounted
• Two Heads, 160,000 Lux each
• Lifespan of LEDs more than 50,000 Hours
• Color Temperature: 4.500 Degree Kelvin
• Dimming Range: 50 – 100 %
• Mechanical Adjustable Focus
• Total Power Consumption to be less than 50 Watts
• Room Dimensions: 6.45 m * 5.45 m * 3.05 m

Operating Table

• carrying out treatments, dressing interventions and operations of general surgery and  traumatology
• Orthopedic Table
• All  exposed metallic parts shall be made from stainless, acid proof steel
• Table base shall be mobile and shall have central brakes Back
• Rest and leg rest inclination angle, kidney elevator, Trendelenburg and reverse-Trendelenburg positions and height adjustment of the table top shall be activated by electro hydraulic system
• Table top shall be translucent for x-rays
• Table top length approximately 2000 mm
• Table top width approximately 600mm
• Minimal height of the table 750mm
• Maximal height of the table 1100mm indicatively
• Trendelenburg at least 25
• Reverse Trendelenburg at least 25º
• Lateral tilt at least 18º
• Back rest inclination angle  at least +55º to -25º
• Head rest inclination angle at least 45º up
• Head rest inclination angle at least 20º down 
• Power requirements 220 Volts, 50Hz 

Accessories

• Body restraint Strap with clamp : 1
• Padded Shoulder supports : 2
• Padded Leg support with swivel type clamp : 2
• Padded arm Rests 450 -500 mm long with two arm Clamps : 2
• Padded Lateral support with universal attachment Clamp : 2
• Padded rubber mattresses with Anti-Microbial agent incorporated into all components that assists in Prohibiting growth of bacteria & fungi and easy to clean and maintain and of at least of 1” thickness : 2
• I.V drip Stands attachable to the table
• Environmental factors: capable of being stored in ambient temperature of 0 – 50 degree C and relative humidity of 15 - 90% The unit shall be capable of operating continuously in ambient temperature of 10 -40 degree C and relative humidity of 15-90%
• CE and FDA Approved